PowerController V2 control unit

Application examples with the PowerController V2 and other control units from our company can be found on our topic page on individual light control .

Compact control unit for numerous lighting applications

As a high-performance control unit for tunable white, dim2warm or color changes, the new PowerController V2 from LUMITRONIX® offers a wide range of options - and all this with a minimal size of just 100 x 29 x 13 mm.

Four input channels (two active and two passive) enable the connection of buttons, dimmers, potentiometers or sensors, for example, while four output channels ensure a lot of flexibility when implementing a wide variety of lighting scenarios.

This means that the PowerController V2 can be used as a one-channel control unit, two-channel control unit, three-channel control unit or four-channel control unit.

Pre-installed standard configuration as well as other variants

We offer the PowerController V2 in the standard configuration 4x buttons and 2x Tunable White. In addition, other configurations are available as free downloads:

• Input: 4x buttons - Output: 4x LED modules, single colors
• Input: 4x potentiometer - Output: 4x LED modules single colors
• Input: 2x buttons, 2x potentiometers - Output: 2x LED modules Tunable White
• Input: 2x buttons, 2 x potentiometers - Output: 2x LED modules tunable white
• Input: 2x buttons, 2x potentiometers - Output: 1x LED module RGBW

An overview and detailed instructions can be found in the download area under "Operating Instructions PowerController V2". The standard configurations are available as a free download here:

• 1_4xButton_4xSingleColour
• 2_4xPoti_4xSingleColour
• 3_4xButton_2xTW
• 4_2xButton2xPoti_2xTW
• 5_2xButton2xPoti_2xTW_(D2W)
• 6_2xButton2xPoti_1xRGBW

These configurations can be uploaded to the PowerController with the programming adapter (Art. 38832). To do this, you need a USB-C cable (item 32035) and a 24V power supply (as an example, item 95057).

Easy installation due to minimal size

The slim format allows installation in almost any type of luminaire, also due to the practical clamps. A total of up to 10 A can be switched via the outputs. The PowerController V2 allows the control of constant voltage LED modules.

LUMITRONIX® - Smart LED product solutions from our own production

The German LED expert LUMITRONIX® offers innovative and customer-specific LED solutions from a single source. Thanks to our own development and state-of-the-art production in Germany, individual, made-to-measure products are easily possible. Benefit from more than 15 years of experience and quality Made in Germany!

features

• Up to four analog signal sources can be freely configured: button, switch, 0-10 V, NTC, potentiometer (100 kOhm, item no. 95181), LDR
• Two analogue signal sources can also be used with active sensors, e.g. E.g.: motion sensor, brightness sensor, capacitive button or infrared sensor
• Four output channels (e.g. 2x tunable white / 1x RGBW / 4 individual colors)
• A total of up to 10 A can be switched via the output channels (1x 10 A / 2x 5 A)
• For controlling constant voltage LED modules (output voltage from 12 - 30 V)
• Input voltage depending on the LED module (12 - 30 V)
• Output power: 120 W at 12 V DC; 240W at 24VDC; 300W at 30VDC
• The compact design with a height of 13 mm and a width of 29 mm allows installation in almost any light. The practical clamps enable quick and easy installation.
• Excellent for controlling the following LUMITRONIX ® Tunable White, Dim2Warm and RGBW products: LumiFlex, SlimFlex, BackMatrix and SmartArray 24V
• Ideal for controlling all types of lights with "Tunable White" LED modules, e.g. B. ceiling lights, industrial lights, floor lamps, wall lights, pendant lights