Meanwell LCM-60BLE (500 - 1400 mA), Casambi constant current source

For intelligent LED lighting, Meanwell has launched the LCM-40/60BLE LED drivers with a Bluetooth mesh network solution. These enable indoor and commercial lights to be controlled using the Bluetooth Low Energy 4.0 Mesh protocol. Casambi's Bluetooth mesh network solution integrated into the series automatically connects to wireless mesh networks, allowing control of a large number of luminaires from a single point without additional gateways. The Casambi Bluetooth app can even be connected to the cloud for data storage and many Bluetooth control devices are available for immediate use.

Before starting, all that is required is to download the app to a smartphone or tablet to set up scenes, timers, etc. The LCM-40/60BLE can also be connected to all Casambi-compatible devices such as wall switches or light sensors to expand the network and develop personalized intelligent lighting control systems. The series is equipped with a DIP switch for setting the output current and includes an AC input with push functionality. With the conventionally installed wall switches, not only the wired LED driver, but also the available lights and assigned groups or scenes can be flexibly controlled via programming. The Meanwell LED drivers LCM-40BLE and LCM-60BLE are installed in a protection class II plastic housing, have a built-in active PFC function and an efficiency of up to 90%. They offer protection against short circuits, overvoltage and overheating, overvoltage protection of 2kV (LN) and have a service life of over 50,000 hours.

Features of the Meanwell LCM-60BLE Casambi power supply

• Input voltage range: 180- 295 V AC (50 - 60Hz)
• Output voltage: 2 V - 40 V (depending on the set constant current also higher, see data sheet)
• Output current: 500 mA - 1400 mA adjustable via DIP switch
• Output Power: 60.3W
• Efficiency: up to 90%
• Dimming range: 10% - 100%
• Protected against overheating, overvoltage, overload and short circuit
• With integrated CASAMBI module
• Can be controlled via CASAMBI app via smartphone, tablet and CASAMBI-enabled switch (e.g. CASAMBI Xpress).
• Protection class II
• Complies with the following standards, among others: EN61547, EN61000-3-2, 3, EN61547, EN55015, EN61000-4-2, 3, 4, 5, 6, 8, 11
• For LED and lighting applications
• built-in PFC circuit, auto recovery
• Operating temperature: -25°C - +90°C
• Degree of protection: IP20
• Dimensions (L x W x H): 124 x 82 x 23 mm
• Weight: 240g